Original PID Controller Settings Original PID Controller Settings

Original PID Controller Settings

RT-680 factory feed rate is 17.0 - Can be lowered to 12.0

RT-300 factory feed rate is 8.6   - Can be lowered to 6.0

 

Adjusting feed rate:

 

  1. Press and hold the down arrow and Extreme Smoke button at the same time.
  2. When C-1 displays on the screen, release the buttons.
  3. Press the up arrow until it displays C-4.
  4. Once on C-4, press the power button and it will display the current feed rate.
  5. To adjust the feed rate down, press the temp display button until it reaches the desired number.
  6. To adjust the feed rate up, press the Extreme Smoke button until the desired setting is displayed.
  7. Press the power button to lock in the setting, and you will return to the C-4 screen.
  8. Press the Extreme Smoke button to exit the settings.

 

Note – Feed Rate in no way affects how fast or slow the auger turns. It is rather a frequency setting. All recteq auger motors are single speed.